Ultrasonic Sensors
BUDS-M18-P314.0-Z8 (Double Sheet Detection)
Product no. 10105194
M18Double SheetPNP NO - NC20...40mm SensingMetal HousingCableUltrasonic Sensor
- Design
- M18×1 mm
- Sensing Distance
- 20…40 mm
- Detectable Material Range
- Paper, cardboard and metal laminated board with a grammage of 20–1200 g/m², films/foils and self-adhesive films up to 0,4 mm thick
- Design
- Cylindrical M18 ultrasonic transducer
- Operating Mode
- Double sheet detection
- Sensing Method
- Pulsed operation with amplitude evaluation
Request a quote for price and delivery time; our team will prepare a tailored offer for you.
- Technical support in choosing the right product for your application
- Send us the product code for an equivalent product recommendation
Technical specifications
- Design
- M18×1 mm
- Sensing Distance
- 20…40 mm
- Detectable Material Range
- Paper, cardboard and metal laminated board with a grammage of 20–1200 g/m², films/foils and self-adhesive films up to 0,4 mm thick
- Design
- Cylindrical M18 ultrasonic transducer
- Operating Mode
- Double sheet detection
- Sensing Method
- Pulsed operation with amplitude evaluation
- Transducer Frequency
- 400 kHz
- Blind Zone
- 5 mm in front of emitter and receiver
- Operating Voltage
- 20…30 VDC, reverse polarity protected
- Ripple
- ±%10
- No-load Current Consumption
- ≤60 mA
- Connection Method
- 2 m PUR cable, 7×0,25 mm²
- Cable
- Emitter: 1,2 m PVC cable; cable between M8 connector and receiver/transducer: 1,2 m PVC cable
- Output
- PNP NO - NC Imax = 200 mA; voltage drop: 2 V; short-circuit protected
- Output Logic
- No paper: white wire OFF, black wire ON; Single sheet: white wire ON, black wire ON; Double/multiple sheets: white wire OFF, black wire ON
- Response Time
- In automatic operating mode: 2,5 ms
- Delay After Power-on
- <750 ms
- Distance Between Emitter and Receiver
- 20…40 mm; optimum: 20 mm ±2 mm
- Permissible Tilt Angle
- Within ±45° of the axis perpendicular to the sheet surface
- Housing Material
- Brass, nickel-plated
- Ultrasonic Transducer
- PU foam, glass-filled epoxy resin
- Maximum Tightening Torque of Nuts
- M18: 15 Nm
- Protection Rating – EN 60529
- IP65
- Operating Temperature
- +5°C…+60°C
- Storage Temperature
- -40°C…+85°C
- Control Unit
- Control input: C1 – C3
- Control Description
- <-V +6 V: Logic 1 (control input terminal connected to -V or open); >-V +10 V: Logic 0 (control input terminal connected to +V)
- Adjustment Range
- Teach-in adjustment via control input
- Indicator Light
- Green: Single sheet; Green flashing: Teach-in; Red: Double/multiple sheets; Red flashing: No paper
