Ultrasonic Sensors

BUDS-M18-P314.0-Z8X (Double Sheet Detection)

Product no. 10105196

M18Double SheetPNP NO - NC20...40mm SensingMetal HousingCableUltrasonic Sensor
Design
M18×1 mm
Sensing Distance
20…40 mm
Detectable Material Range
Paper, cardboard and metal laminated board with a grammage of 20–1200 g/m², films/foils and self-adhesive films up to 0,4 mm thick
Design
Cylindrical M18 ultrasonic transducer
Operating Mode
Double sheet detection
Sensing Method
Pulsed operation with amplitude evaluation

Request a quote for price and delivery time; our team will prepare a tailored offer for you.

  • Technical support in choosing the right product for your application
  • Send us the product code for an equivalent product recommendation

Technical specifications

Design
M18×1 mm
Sensing Distance
20…40 mm
Detectable Material Range
Paper, cardboard and metal laminated board with a grammage of 20–1200 g/m², films/foils and self-adhesive films up to 0,4 mm thick
Design
Cylindrical M18 ultrasonic transducer
Operating Mode
Double sheet detection
Sensing Method
Pulsed operation with amplitude evaluation
Transducer Frequency
400 kHz
Blind Zone
5 mm in front of emitter and receiver
Operating Voltage
20…30 VDC, reverse polarity protected
Ripple
±%10
No-load Current Consumption
≤60 mA
Connection Method
2 m PUR cable, 7×0,25 mm²
Cable
Emitter: 1,2 m PVC cable; cable between M8 connector and receiver/transducer: 1,2 m PVC cable
Output
PNP NO - NC Imax = 200 mA; voltage drop: 2 V; short-circuit protected
Output Logic
No paper: white wire OFF, black wire ON; Single sheet: white wire ON, black wire ON; Double/multiple sheets: white wire OFF, black wire ON
Response Time
In automatic operating mode: 2,5 ms
Delay After Power-on
<750 ms
Distance Between Emitter and Receiver
20…40 mm; optimum: 20 mm ±2 mm
Permissible Tilt Angle
Within ±45° of the axis perpendicular to the sheet surface
Housing Material
Brass, nickel-plated
Ultrasonic Transducer
PU foam, glass-filled epoxy resin
Maximum Tightening Torque of Nuts
M18: 15 Nm
Protection Rating – EN 60529
IP65
Operating Temperature
+5°C…+60°C
Storage Temperature
-40°C…+85°C
Control Unit
Control input: C1 – C3
Control Description
<-V +6 V: Logic 1 (control input terminal connected to -V or open); >-V +10 V: Logic 0 (control input terminal connected to +V)
Adjustment Range
Teach-in adjustment via control input
Indicator Light
Green: Single sheet; Green flashing: Teach-in; Red: Double/multiple sheets; Red flashing: No paper